Tools/Maintenance

- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes - Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes

The BK-UK includes six new and revised parts for the Park Tool BKD-1 and BKM-1 Hydraulic Brake Bleed Kits, allowing for compatibility with the latest brake models from popular manufacturers. Includes: - Part #2600A (x2) — M4 x 0.8 adaptor for use with SRAM DB8, Trick Stuff, and Campagnolo mineral oil brake systems - Part #2588.2 — Thin-walled hose compression sleeve for internal bleed nipples, such as those found on Shimano mineral oil brake systems - Part #2574A — Hose assembly with integrated fitting for bleed nipples such as those found on Shimano mineral oil brake systems - Part #2615-2 (x2) — 11 mm bleed blocks for use with Hayes DOT brake systems All parts also available individually. NOTE: The seals on each part are designed for one type of fluid — DOT fluid or mineral oil — and should be used only on the systems they were intended for. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure.

The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. - RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Maximum length: 350 cm | 12 ft. - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6") - The RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Metric and SAE readings up to 350 centimeters or 12 feet - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6")

The CT-15 is a professional-grade tool designed to drive rivets in and out of any bicycle chain, from beefy single-speed half-link chains to the latest 13-speed systems. The unique triple-wide floating shelf ensures that every chain is securely fixtured and centered during use. The ergonomic handle stores spare driving pins as well as a peening anvil used for peening Campagnolo® 11, 12, and 13-speed chains. Built for daily use and fully rebuildable. - Compatible with single-speed bicycle chains including 1/8"", 3/16"" and half-link - Compatible with all 5 to 13-speed derailleur chains, including SRAM® 12-speed Flattop™, SRAM® 12-speed T-Type, Shimano® 12-speed XTR®, and Campagnolo® 13-speed Ekar™ - Includes removable anvil for peening Campagnolo® 11 to 13-speed chains - Includes two spare driving pins (part #2987)

The Range Click Torque Wrench replaces its predecessor with solid, tactile click-torque function, a wide measurement range, user-friendly ergonomics, and shop-quality fit and finish. With 13, high precision S2 tool steel bits and a protective, compact, and weather resistant TPU fold up style case, this tool is a perfect companion for safe, secure repairs in the shop or on the go. - Torque wrench handle features magnetic, 72-tooth ratchet, dual-sided torque setting window, dual-direction torque measurement compatible for right- and left-hand threaded bolts - 13 bits included: 2, 2.5, 3, 4, 5, 6, 8mm hex, T10, T25, T30 Torx, and 4, 5mm, Torx T25 (extended 50mm length) - Torque measurement from 2-14Nm, adjustable in 0.17Nm increments, scale displayed in 1Nm increments - Dual-sided window display scale allows easier ambidextrous usability and permits larger, easier to read torque setting numbers - Accurate within +/- 4% for 4,000 cycles - Plastic-free head and handle. PFAS-free tool roll. Plastic-free, 80% recycled paperboard packaging

Forged and precisely machined, the high leverage LP-7 Utility Pliers include an integrated cutting blade and soft touch grips.

Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

The Park FR-7 Freewheel Remover fits Falcon freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks. - Fits chainring of Specialized, Cannondale and FSA - For lockrings with 47–48mm outside diameter and 4 or 8 notches - Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life

The 15-inch SWB-15 is a forged steel breaker bar with a 3/8-inch square drive head that pivots 180º. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.

All Feedback Sports repair stands are designed to be excellent at home and excel in the field. The Tool Tray add-on is the ultimate service partner for the most demanding mechanics. It’s lightweight and durable design delivers easy access to tools, lubricants, spare components and accessories during tune-ups or bike washing sessions. With a towel hook, drain ports, compartmentalized tool holders and a spot for your coffee mug or adult beverage, what else could a bike mechanic need?

A great way to keep the benchtop organized during a repair, the OM-2 features an over-sized textured work area and raised trays for organizing small parts and hardware. Perfect for overhauling or rebuilding components such as forks, shocks, hubs, suspension linkages, derailleurs, etc. - Measures 15 x 24.5-inches (38cm x 62cm) - Interlocking edges allow multiple mats to be joined together - Tear/abrasion/shock-resistant TPR construction

DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap

Park's AWS-8 Hex Wrench Set features Bondhus balldriver ends, which facilitate use when the tool is at an angle to the bolt. This is great for working in hard-to-reach areas, such as reaching water-bottle-cage screws. The AWS-8 has 4, 5, and 6mm wrenches, which are the most common bicycle bolt sizes. Plus, its Y shape and vinyl coating provide excellent leverage and comfort.

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

A puncture in your tubeless tire doesn't have to be a death sentence for your ride. This handy carry-along tool repairs small punctures and cuts in tubeless bicycle tires without removing the tire from the rim, getting you back on the trail in no time. The TPT-1 easily plugs the hole by inserting one of the 5 included vulcanized rubber plugs into the puncture. This shrinks the puncture down to a manageable size, allowing the tubeless sealant to do its job and reestablish a seal. The unique sliding plug retainer holds the plug in place and prevents it from being pulled back out as the tool is removed. Everything is stored in a compact package that fits easily in a saddlebag or backpack pocket. - Includes 5 vulcanized rubber plugs (refills available — part #2370K) - Dimensions: 89 x 27 x 40 mm (3.5" x 1.1" x 1.6") - Weight: 79 grams (2.8 oz.) with plugs NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

50 HOUR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, GREASE/OIL) - DELUXE C1+/SUPER DELUXE C1+/SUPER DELUXE FLIGHT ATTTENDANT C1+ (2023+)

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment. Kit Includes: - AWS-1 3-Way Hex Wrench - BBB-4 Big Blue Book of Bicycle Repair - CC-4 Chain Checker - CM-5.3 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - DH-1 Dummy Hub - DT-2 Rotor Truing Fork - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool

200 HOUR/1 YEAR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, IFP SEALS, SEAL GREASE/OIL) - SUPER DELUXE THRUSHAFT C1 - TREK (2021)

The SRAM Hose Cutter Pro cuts bicycle brakes lines with ease. Extra leverage from the premium aluminum handle translates to precise, confident trimming of hoses. Features - Ergonomic touchpoints and sturdy aluminum handle provide extra leverage for smooth, confident cutting action - Hydraulic brake hose sits in a cradle to ensure a perfect, repeatable square edge cut - Premium materials and construction designed for use in professional workshops - Replaceable cutting blades to ensure a sharp, clean cut.

- Specially formulated to remove heavy chain grime quickly and safely - Leave the chain contaminant free - Chain cleaner spray uses advanced solvents to cut through dirt and grease quickly and effectively

The conically shaped tip of the tool is designed to slide between the pads inside the caliper and spread the pads by pushing pistons back into the caliper. Tool is bent 30° for easier access to the caliper

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

A handy tool to prevent spoke windup when working with bladed spokes Slots from 1.0mm-2.2mm for most spoke sizes

Unior, Freewheel removal tool, Removal Tool, Compatible with Shimano, SRAM, Sachs, Sun Race Use with ½” wrench

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

Modern replacement of the traditional chain whip Pins on the tool engage with the smallest sprocket on the cassette and hold it in place, while the opening in the middle allows for easy access to the cassette lockring

Get back on the road with genuine replacement parts. For proper assembly. Details: - Works with TQ connectors - Sold individually

Trek proprietary suspension service tools. - For use with 12mm x 21mm rocker pivot bearings - Complete solution for removing bearings installed over bearing spacer pivots

Park handles all of your screwdriver needs with their Shop Screwdriver Set that includes 3mm and 6mm regular, and #0 and #2 Phillips screwdrivers. They feature heat-treated chrome-vanadium tips and shafts for maximum durability plus dual-density grips for top control and comfort.

Widely versatile bit for home and shop use. GENUINE REPLACEMENT PARTS The right tool for the right job. PRODUCT DETAILS - Anti-tampering bit is used for various Powerfly and B-Cycle fasteners - T25 Tor/ head

PRO X Freehub Grease, using our MRCC Micro Resistant Complex Compounds, is specifically designed for all freehubs that require a very lightweight grease. Non-pawl freehubs recommend a grease to stay in the mechanisms moving parts. Oils generally are to thin and will move away from moving parts leaving them exposed to wear and malfunction due to lack of lubrication. PRO X Freehub Grease performs in a broad temperature range from the summer heat to the extreme cold temperatures. "Pour Point" of PRO X Freehub Grease is -30F / -34C degrees. PRO X Freehub Grease works exceptional in hubs that share lubrication between the freehub and wheel bearings. Follow the manufacturer's specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech's PRO X Freehub Grease. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubrication, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X reports that its performance is significantly better than any other lube they have ever used. Benefits: - Performs in cold conditions. Ideal for Snow Bikes - Reduces resistance - Reduces watts used. - No shipping restrictions, can be sent anywhere in the world by air or ground. - No VOC's.

Ever wonder why so many Tour de France and professional mechanics rely on dropout-style wash and work stands? It’s because they can adapt to virtually any bike quickly and easily, offer a rotating platform, and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. The compact and portable design accommodates almost any frame and it’s stable platform and durable construction is ready to take your bike maintenance to the next level.

Our Classic Freehub Grease is specifically designed for all freehubs that require a lightweight grease. These style hubs we like to call the more mechanical hubs. Unlike the simpler, fewer parts of the Pawl style hubs. Dumonde Tech Freehub Grease performs in a broad temperature range from the heat of summer to the frigid temperatures of the north. "Pour Point" of Freehub Grease is -30 degrees. Follow the manufacturer's specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech's Freehub Grease. Our Freehub Grease is Exclusively used by: Industry 9 "Legacy", "Hydra" and "101" hubs and Stan's NoTubes, Hermes Sport, and Hawk Racing. Used, endorsed and/or recommended by: Crank Brothers, Boyd Cycling, Ritchey Design and Paul Components. Campagnolo North America recommends our Freehub Grease as an alternative to their lb-100 Grease as it is no longer available in North America. Our Freehub Grease is a proven replacement for any hub or wheel company's grease.

HG, Needle Applicator, Chain lube,18 ga

EXP Star Ratchet Disassembly Tool- Ratchet EXP Hubs

This ultra-high-performance grease is ideal for use on bicycles. The low-friction formula resists water and contaminants without standing out on the bike Product details - Performance waterproof grease for bicycle bearings, seals, assembly, and more - The formula reduces friction while performing longer between service intervals - Superior water washout resistance stands up to power washing - Unscented and undyed - As with all grease, clean and remove old grease first to guarantee compatibility - Compatible with Loctite Threadlocker and all metals, plastics, and carbon fiber - Available in a wide range of sizes and dispensing methods - 3oz (85g) cartridge is most compatible with the Bontrager Grease Gun

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

- Paintbrush-like shape for easier application and cleaning

A high-performance bike polish that’s designed specifically for bicycles so you can keep them looking their best. Get your shine on Make your bike shine with this bike specific polish. It features a gloss-enhancing formula that seals and protects the paint, while guarding against water, dust, and dirt so your bike looks as good as it rides. Product details - High-performance bike polish designed for all bikes and all paint finishes - Proprietary formula is Trek's factory-recommended bike polish - Safe on all paints, but may alter finish on matte paints - Pleasing grape scent - For easiest results, spray onto clean microfiber cloth and apply to clean bike - 12 fl oz (355mL) spray bottle is easy to use and refillable - Also available in 1g/3.8L bulk bottle for easy and economical refills - Keep out of reach of children and do not ingest

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized. - Hex 3/4/5mm - Torx T-20/25 - Phillips #1 - 4 or 5Nm max torque - Bit holder included

Modern carbon rims and tires create a real challenge for traditional tire levers, and the new wave of tubeless setups have taken the challenge to the next level. Tire fits are tighter than they've ever been, while carbon rims require non-metal levers to resist damage to the bead or brake surface during use. Previous solutions to this problem have involved using a metal core inside of a plastic lever however, this solution has its own challenges as the core of the lever is where you can add the least stiffness and strength. This leaves metal core levers both less stiff and heavier than they need to be. - Forged alloy blade - Reinforced nylon Rim Shield safe for use on carbon rims - Integrated spoke-hook wing - 105mm x 25mm x 7mm (Perfect for Seat Roll Premio or EOLO Wallet) - Weight (Two levers and neoprene sleeve)—36 grams

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place

DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)